- Home
- Products
- Genset Controllers
- SMA3000-0012 Genset Controller
SMA3000-0012 Genset Controller
SMA3000-0012 is a genset controller (auto start module) for generator control panels.
About this part
The controller is the generator's brain. Replacing an old or faulty one is often the quickest way to make an unreliable standby set dependable again.
Features
- Acrylic screen, improved wearable and scratch resistance property
When to replace it
- Generator does not start on a mains failure
- Faulty display or buttons
- Upgrading a set to automatic start
- Adding remote monitoring
Before you order
Check the supply voltage (12 V or 24 V), the number of inputs and outputs you need, and the panel cut-out size. Note every wire on the old controller before removing it.
Match the number stamped on the part you are removing, or the number in your engine or alternator manual, before ordering. Part numbers are shown for reference so the right replacement can be identified.
Questions
Will it work with my engine?
Most auto start modules work with any mechanically governed diesel engine using standard senders. Electronic engines may need a CAN bus controller.
Specifications
| Part number | SMA3000-0012 |
|---|---|
| Brand | IEP Power Products |
| Range | Genset Controllers |
| Working Voltage | DC8.0V to DC35.0V, continuous |
| Power Consumption | <3W(Standby mode: ≤2W) |
| AC Alternator Frequency | 50Hz/60Hz |
| Rotate speed sensor Voltage | 1.0V to 24V (RMS) |
| Rotate speed sensor Frequency | 10,000 Hz (max.) |
| Start Relay Output | 16 A DC28V at supply voltage |
| Fuel Relay Output | 16 A DC28V at supply voltage |
| Auxiliary Relay Output 1 | 7 A DC28V at supply voltage |
| Auxiliary Relay Output 2 | 7 A AC250V volt-free output |
| Auxiliary Relay Output 3 | 16 A AC250V volt-free output |
| Auxiliary Relay Output 4 | 16 A AC250V volt-free output |
| Overall Dimensions | 209mm x 166mm x 45mm |
| Panel Cutout | 186mm x 141mm |
| C.T. Secondary Current | 5A (rated) |
| Working Condition | Temperature: (-25~70)ºC; Humidity: (20~90)% |
| Storage Condition | Temperature: (-30~+80)ºC |
Not sure it fits?
Send us the number on your old part, or a photo with the engine or alternator nameplate, and we'll confirm the match.
WhatsApp Mieke
